4 wireless bridge, 1 wds link settings, Ireless – PLANET WAP-6100 User Manual
Page 36: Ridge
Advertising
4.4 Wireless Bridge
Wireless Bridge mode help to make the two or more Ethernet networks connected without any wire. With
multiple WAP-6100s in this mode, several LANs in distance can communicate to each other. This could
be deployed if the networks are hard to make the wire in between.
4.4.1 WDS Link Settings
In the “WDS Link Settings”, select “Enable” in the “Mode” field. Then you are able to fill in MAC
Address of each target WAP-6100.
Advertising