PLANET WAP-6100 - Manual (Page 30)

4.2.1 Connection Status
Network type Here indicates the WAP-6100 works in AP mode or Client mode
(Infrastructure mode / Ad Hoc mode).
SSID Here displays current SSID assigned to the WAP-6100.
BSSID The MAC address of the associated AP.
Connection status This column shows current connection status. If WAP-6100 already connects
to an Access Point or station, here will show “Associated”. Otherwise,
connection column will show “N/A” which means no connection to any
Access Point or station.
Wireless mode Here show the Access Point current work in 11b, 11g, or super G mode.
Current channel This column indicates the radio channel currently in use.
Security Here indicates AP security settings in client mode. Should be either
“Disabled”, “WEP” or ‘WPA-PSK”.
Rx data rate (Mbps) Displays current receive data rate.
Tx data rate (Mbps) Displays current transmit data rate.
Link quality This column shows current link quality with AP in 0 to 100 percentage scale.
Signal strength This column shows current signal strength with AP in 0 to 100 percentage
scale.
Activity Displays the number of packets received and transmitted through this
WAP-6100.