Pole mounting, Figure 8 pole mounting – step 1, Figure 9 pole mounting – step 2 – PLANET WNAP-6300 User Manual
Page 19
Advertising
Chapter 2 Hardware Installation Page 10
Pole Mounting
1.
Turn the WNAP-6300 over. Put the pole mounting ring through the middle hole of it. Note that
you should unlock the pole mounting ring with a screw driver before putting it through
WNAP-6300 as the following right picture shows.
Figure 8 Pole Mounting – Step 1
2.
Mount WNAP-6300 steadily to the pole by locking the pole mounting ring tightly.
Figure 9 Pole Mounting – Step 2
Advertising