PLANET WPG-200N User Manual
Page 13
Advertising
PLANET 802.11n Wireless Presentation Gateway
Step 2.
When the projector shows the default screen as below, it indicates WPG-200N is ready now.
Figure 2-4 Projector default screen
If the screen is out of range, please turn off the projector or monitor first. Then
turn on the projector or monitor again to reset the configuration.
Step 3.
User your laptop or desktop to site survey the wireless signal of WPG-200N, and connect your PC
with it wirelessly. The default SSID is WPG-200N.
13
Advertising