PLANET WPG-200N - Manual (Page 34)

PLANET 802.11n Wireless Presentation Gateway
server of WPG-200N will be enabled and the clients of
WPG-200N will obtain IP address by itself.
Or you can select this option to use the fixed IP address for
WPG-200N. (Default Settings)
IP Address The default value is 192.168.1.1
Subnet Mask The default value is 255.255.255.0
Default Gateway The default value is 192.168.1.1
Use the following IP
address
DNS Server The default value is 192.168.1.1
DHCP Server Setup
Select “Auto” to enable the built-in DHCP server of
WPG-200N. (Default Settings)
Start IP The default value is 192.168.1.11
End IP The default value is 192.168.1.254
Subnet Mask The default value is 255.255.255.0
Default Gateway The default value is 192.168.1.1
Auto
DNS Server The default value is 192.168.1.1
Disable Or you can select this option to disable the DHCP server of
WPG-200N.
Wireless Setup
The option for enabling or disabling wireless LAN function Wireless LAN
Embedded AP
SSID
You can configure the SSID string here
when Wireless LAN is enabled.
Region The default value is “Worldwide”.
SSID Broadcast The default value is “Enable”.
Channel If you select “Auto”, the WPG-200N will scan all of the wireless
channels and choose a clear one automatically. Or you can
select a fixed channel.
Encryption The option of wireless security. You can select one of WEP /
WPA / WPA2, or disable it.
The wireless security of WPG-200N supports
AES (Advanced Encryption Standard).
Key If Encryption is enabled, you have to set the key according to
the encryption mode you selected.
AP Client
Connect to Existing AP The option for enabling or disabling AP client mode. By this
feature you can join other Access Point wirelessly. And LAN
34