PLANET WPG-200N - Manual (Page 38)

PLANET 802.11n Wireless Presentation Gateway
4.3.7. Firmware Upgrade
This page allows you upgrade the WPG-200N firmware to new version. Please note, do not power off the
device during the upload because it may crash the system.
Figure 4-12
If it is necessary to upgrade the firmware, please follow the steps below to operate carefully.
Step 1. First, download the latest firmware image file from PLANET website.
Step 2. Click Browse button to specify the file you want to upgrade.
Step 3. Click Upgrade button to start.
Step 4. There will be a warning message shown and count down counter on the screen.
Step 5. After a few minutes, a complete message shown on the screen.
Step 6. Power off the WPG-200N, then power on it again.
Step 7. Login the web UI, and click Reset to Default to take effect.
New firmware versions posted at the website of PLANET Technology can be downloaded for
free. There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use.
38