PLANET WPG-200N - Manual (Page 30)

PLANET 802.11n Wireless Presentation Gateway
Step 1. Click “Conference Control”.
Step 2. Enter the password. The default value is “trainer”. Then press Login button.
Figure 4-3
Step 3. After login, you can see a user list on the screen which indicates the clients who have already login
into the WPG utility. There are three columns, “Name”, “Play Control” and “IP Address”.
There are six buttons:
Play (Full Screen) Play Split #1 Play Split #2
Play Split #3 Play Split #4 Stop
Figure 4-4
4.3. Admin
This function allows you to login web management UI of WPG-200N. Click “Admin”, and enter the password.
The default value is “admin”. Then click the Login button or press the Enter key.
Please refer to the following sections for further configuration of the web management UI.
30