2 hard disk installation – PLANET DVR-1672 User Manual
Page 22
Advertising
16
Step 1:
Remove the upper case.
Step 2:
Lock the HDD holder symmetrically onto both sides of the HDD.
Step 3:Insert the SATA cable and power cable onto the SATA HDD
Step 4: Place the HDD on the HDD plate of the removed case and connect the power and
the SATA cable.
Step 5:
Connect the Power and SATA cable into the sockets on the main board. Make
sure that the HDD1 cable has been properly inserted into HDD1 socket.
Lock the screw
Advertising