PLANET DVR-1672 - Manual (Page 80)

74
9.1.2 Mobile Application Operation
After the installation, enter Program Files menu in your mobile device to run a file called
“H264 MIDlet”.
Select “Menu” at the right lower corner of your mobile screen, 4 commands, Login Add
Modify and Delete, will show up.
9.1.2.1 Add New Login DVR
To log into the DVR, you need to enter the logging-in DVR information. Find “Add” under
the “Menu” then enter logging-in DVR’s IP address, Port number, account name and
password. Press “Add” to save this information after entering.
9.1.2.2 Logging onto the DVR
Use the Login command to log onto a DVR and monitor live images. If multiple DVRs
have been added to the mobile application, they will be listed by name, you can select
one to log onto.
A confirmation message might show up for a network charge before connection. The
fee rate will depend on the telecom company and package fee that you go with.
Network connectivity will take some time. It will be affected by networking environment
and bandwidth flow. Live image will show up after a successful connection.