Chaper 3. connecting to the nvr, 1 using device search utility – PLANET NVR-420 User Manual
Page 16
Chaper 3. Connecting to the NVR
There are various ways you can connect to the NVR and below are the
suggested methods for different network setups:
The NVR is placed in a network with a DHCP server: Connect to the
NVR by using
“Device Search” Utility.
The NVR is placed in a network without DHCP server (or you are
connecting to it directly):
Access NVR with its default IP (192.168.0.20).
3.1 Using Device Search Utility
If the NVR is placed in a corporate network or a local area network where a
DHCP server is already presented, please install the “Device Search” utility from
the bundled CD disk.
To begin, launch the “Device Search” utility from the CD and proceed with the
installation.
16
4-CH H.264 Network Video Recorder with HDMI
User’s Manual of NVR-420