PLANET NVR-420 User Manual
Page 52
3. Found cameras should be listed and simply select a camera from the list and
press “Configure”.
4. Its corresponding information should be displayed in the “Camera
Information” section. Enter its user name and password and select the channel
ID and name the camera.
5. Click on “Detect” to establish connection between the recorder and the
camera. If connection establishes successfully, camera’s detailed information
should be polled and displayed as shown below.
6. Adjust its video format, frame rate, resolution or bitrate, etc if you wish. You
can also click on the “Preview” to preview the live video of the camera.
Click “Add” to finish adding the camera.
If cameras are marked with “*” in the search result, it means those cameras
are already configured and connected to NVR.
52
4-CH H.264 Network Video Recorder with HDMI
User’s Manual of NVR-420