PLANET ADN-4100 - Manual (Page 46)

3.2.6
19B
Time and Date
Choose Setup > Time and Date. The TIME AND DATE page as shown in the
following figure appears:
In the TIME AND DATE page, you can configure, update, and maintain the time
of the internal system clock. You can set the time zone that you are in and the
network time protocol (NTP) server. You can also set daylight saving time to
automatically adjust the time when needed.
Select Auto matically synchronize with Internet time servers. Select the
appropriate time server and the time zone from the corresponding drop-down
lists.
Select Enable Daylight Saving if necessary. Enter the correct the start and end
time of the daylight saving.Click Apply to save the settings.
35