3 default gateway, 4 rip settings, Default gateway – PLANET ADN-4100 User Manual
Page 92: Rip settings
Advertising
3.3.11.3
75B
Default Gateway.
Choose Advanced > Routing and click Default Gateway. The page as shown in
the following figure appears:
In this page, you can select Enable Automatic Assigned Default Gateway, or
enter the information in the Use Gateway IP Address and Use Interface fields.
Click Apply to save the settings.
3.3.11.4
76B
RIP Settings
Choose Advanced > Routing and click RIP. The page as shown in the following
figure appears:
81
Advertising
This manual is related to the following products: