PLANET ADN-4100 - Manual (Page 79)

3.3.10.6
67B
SNMP
In the NETWORK TOOLS page, click SNMP. The page as shown in the following
figure appears:
In this page, you can set the SNMP parameters. The following table describes
the parameters in this page.
Field Description
Enable SNMP Agent
Select or deselect the check box to enable or disable
SNMP agent.
Read Community
Universal character to obtain the device information. It
is similar to the password. The SNMP application entity
can use it to directly obtain the device information.
Set Community
Universal character to modify the device configuration.
It is similar to the password. The SNMP application
entity can use it to directly modify the device
configuration.
Trap Manager IP
Enter the address of the server that receives the trap
message.
Trap Community
The field that is included in the trap message sent by
the device.
Trap Version
Select the trap version from the drop-down list. You can
select v1 or v2c.
68