Get port and command active bits block – ProSoft Technology MVI69L-MBS User Manual
Page 134
Reference
MVI69L-MBS ♦ CompactLogix Platform
User Manual
Communication Module
Page 134 of 154
ProSoft Technology, Inc.
January 6, 2014
7.4.12 Get Port and Command Active Bits Block
Block 9501: Get Port and command active bits
This block requests the enabled/disabled status of application port and Master
commands.
Block 9501: Request from Processor to Module
Offset
Description
0
Write Block ID: 9501 to get port and command enable/disable state
1 to 239
Spare
Block 9501: Response from Module to Processor
Offset
Description
0
Read Block ID: 9501 requested by processor.
1
Write Block ID: To be used by the processor in its next Write block.
2
Port 1 active state: 0=disabled, 1=enabled
3-22
Command enable bits for Port 1 commands (0=disabled, 1=enabled)
23
Spare
24-43
Command enable bits for Port 2 commands (0=disabled, 1=enabled)
44 to 239
Spare