ProSoft Technology MVI69L-MBS - Manual (Page 95)

MVI69L-MBS ♦ CompactLogix Platform Diagnostics and Troubleshooting
Communication Module User Manual
ProSoft Technology, Inc. Page 95 of 154
January 6, 2014
6 Close the ProSoft Discovery Service window. Enter the temporary IP address
in the Ethernet address field of the Connection Setup dialog box, then click
the T
EST C ONNECTION button to verify that the module is accessible with the
current settings.
7 If the Test Connection is successful, click C
ONNECT . The Diagnostics menu
displays in the Diagnostics window. At this point, the module has been
established on the Ethernet network with a unique IP address.
6.4 Using the Diagnostics Menu in ProSoft Configuration Builder
ProSoft Configuration Builder (PCB) provides diagnostic menus for debugging
and troubleshooting.
To connect to the module’s Configuration/Debug Ethernet port
1 In ProSoft Configuration Builder, select the module, and then click the right
mouse button to open a shortcut menu.
2 On the shortcut menu, choose D IAGNOSTICS .