ProSoft Technology MVI69-DNPSNET - Manual (Page 48)

MVI69-DNPSNET ♦ CompactLogix or MicroLogix Platform Diagnostics and Troubleshooting
Distributed Network Protocol Interface Module
Page 48 of 119 ProSoft Technology, Inc.
November 3, 2008
Because this is a text-based menu system, you enter commands by typing the
command letter from your computer keyboard in the diagnostic window in
ProSoft Configuration Builder (PCB). The module does not respond to mouse
movements or clicks. The command executes as soon as you press the
command letter — you do not need to press [Enter]. When you type a command
letter, a new screen will be displayed in your terminal application.
Using the Diagnostic Window in ProSoft Configuration Builder
To connect to the module's Configuration/Debug serial port:
1 Start PCB program with the application file to be tested. Right click over the
module icon.
2 On the shortcut menu, choose Diagnostics.