Setting the flash functions, Changing the firing mode, P233) – Panasonic Lumix DMC-G7 body User Manual

Page 233

Advertising
background image

233

8. Stabilizer, Zoom and Flash

Setting the Flash Functions

Applicable modes:

Select whether to set the flash output automatically or manually.

1

Select the menu.

(P63)

2

Press 3/4 to select the item and then press [MENU/SET].

When [MANUAL] is set, the luminosity ratio ([1/1], etc.) is displayed on the flash icon on the
screen.

This item is not available when an built-in flash is being used.

1

Select the menu.

(P63)

2

Press 2/1 to select an item and then press [MENU/SET].

You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].

This item is available only when [Firing Mode] is set to [MANUAL].

Changing the firing mode

>

[Rec]

> [Flash] > [Firing Mode]

[TTL]

The camera automatically sets the flash output.

[MANUAL]

Set the luminosity ratio of the flash manually. In [TTL] you can shoot the
photograph you want even when shooting dark scenes that may
otherwise be too brightly lit by the flash.

Setting the output ratio manually

>

[Rec]

> [Flash] > [Manual Flash Adjust.]

MENU

MENU

Advertising