Panasonic Lumix DMC-G7 body - Manual (Page 390)

13. Others
390
• Is your finger covering up the speaker? (P18)
• If the camera is moved too slowly, the camera has assumed that camera motion was stopped
and will end the still picture recording.
• If there is a great deal of shaking towards the recording direction while moving the camera,
recording will end.
• When the ambient temperature is high or recording with [ ] ([4K Burst]) or [ ]
([4K Burst(S/S)]) of the 4K Photo function is performed continuously, the camera may display
[
] and stop the recording to protect itself. Wait until the camera cools down.
• You may not be able to record for a short while after turning this unit on when using a large
capacity card.
• When the ambient temperature is high or motion picture is recorded continuously, the camera
may display [
] and stop the recording to protect itself. Wait until the camera cools down.
• Depending on the [Rec Format] and [Rec Quality] of a motion picture, the speed class rating
required for the card differs. Use a card that meets the rating. For details, refer to
“ About motion
picture/4K photo recording and speed class ratings ” on P22 .
• When a card with a slow data writing speed is used, motion picture recording may stop midway.
> If a card on which recording and deleting have been repeated many times or a card that
has been formatted on a PC or other equipment is being used, we recommend that you
make a backup of the data and format
(P33) the card on the unit.
• When recording a motion picture, the screen may go dark after a certain period to reduce
battery consumption, but this will not affect the recorded motion picture.
• Depending on the environment at the time of motion picture recording, the screen may be
blacked out momentarily or the unit may record noise due to static electricity or powerful
electromagnetic waves (radio towers, high voltage power lines, etc.).
Operation sound is small.
Recording by Panorama Shot Mode is ended before finishing.
4K photo recording stops before finishing.
Motion pictures
Recording motion pictures is not possible.
Motion picture recording stops in the middle.
When recording a motion picture, the screen may go dark.
The screen may be blacked out momentarily, or the unit may record noise.