Sony Cyber-shot DSC-RX100 IV - Manual (Page 181)

[187] How to Use Changing settings Setup menu
HDMI Info. Display
Selects whether to display the shooting information when this product and the TV are
connected using an HDMI cable (sold separately).
1. MENU
→
(Setup
) → [HDMI Settings] → [HDMI Info. Display] → desired setting.
Menu item details
On:
Displays the shooting information of the played back image.
Off:
Does not display the shooting information of the played back image.
[188] How to Use Changing settings Setup menu
TC Output (movie)
Sets whether or not to layer the TC (time code) information on the output signal via the
HDMI terminal when outputting the signal to other professional-use devices.
This function layers the time code information on the HDMI output signal. The product sends
the time code information as digital data, not as an image displayed on the screen. The
connected device can then refer to the digital data to recognize the time data.
1. MENU
→
(Setup
) → [HDMI Settings] → [
TC Output]
→ desired setting.
Menu item details
On:
Time code is output to other devices.
Off:
Time code is not output to other devices.
Note
When [ TC Output] is set to [On], the image may not be output properly to the TV or
recording device. In such cases, set [ TC Output] to [Off].