Ricoh Pentax КP - Manual (Page 65)

3
Shoo
ting
63
3
Select the AF area.
Use the frame that appears on
the monitor to change the
position and size of the AF area.
Available operations
4
Press E.
The AF area is set.
t Memo
• In R mode, [AF Active Area] is fixed to [Face Detection].
• You can switch the function of the arrow keys to AF area
change mode with X, Y, or Z, instead of pressing and
holding E. (p.102) When [Change AF Area] is assigned to
X
, Y, or Z, the operation by pressing and holding E is
disabled.
You can precisely fine-tune your lenses with the camera’s
autofocus system.
1
Select [23 AF Fine Adjustment] in the E4 menu
and press D.
The [23 AF Fine Adjustment] screen appears.
2
Select [Apply All] or [Apply One] and press E.
3
Select [Setting] and adjust
the value.
Available operations
4
Press E.
The adjustment value is saved.
5
Press F twice.
The camera returns to standby mode.
ABCD Changes the position of the AF area.
R Increases/reduces the size of the AF
area (when [Multiple AF Points] is
selected).
M Returns the AF area to the center.
OK OK
AF Fine Adjustment E 4
Apply All
Applies the same adjustment value to all
lenses.
Apply One
Saves an adjustment value for the lens
being used. (Up to 20 values)
D /R to the right Adjusts the focus to a closer
position.
C /R to the left Adjusts the focus to a farther
position.
M Resets the adjustment value to
the default setting.
±0 ±0
±0 ±0
3 3
23 23 AF Fine Adjustment AF Fine Adjustment
Apply One Apply One
Setting Setting
Reset Individual Settings Reset Individual Settings
Save Save Cancel Cancel