Ricoh Pentax КP - Manual (Page 98)

5
Sh
aring
96
1
Set the wireless LAN (Wi-Fi™) function to ON on
the communication device.
2
Tap [PENTAX_xxxxxx] in the list of detected
Wi-Fi™ networks.
3
Enter the password, and
tap [Join].
A Wi-Fi™ connection is
established between the camera
and the communication device.
4
Start Image Sync on the communication device.
Image Sync is started, and the list of images appears.
Flick left or right on the screen to switch operation modes.
t Memo
• You can change the operation mode also by tapping the
buttons displayed at the bottom of the screen.
When an iOS Device is Used Screens of Image Sync
Application image list Camera image list
A mode