Ricoh Pentax КP - Manual (Page 96)

5
Sh
aring
94
1
Select [Wi-Fi] in the D3 menu and press D.
The [Wi-Fi] screen appears.
2
Set [Action Mode] to [On].
Select [Off] to disable the Wi-Fi™
function.
3
Press F twice.
t Memo
• In Step 2, select [Communication Info] to check the SSID,
Password, and MAC Address of the wireless LAN. Or, select
[Reset Settings] to reset the settings to their default values.
If you use the Wi-Fi™ function frequently, assign the function to
the X button so that you can easily turn the function on and off
with a simple button operation.
1
Assign [Wi-Fi] to X.
y Setting the X button operation (p.102)
2
Press and hold X in
standby mode.
A beep sounds and [Wi-Fi
enabled] appears on the monitor.
Press and hold X again to
disable the Wi-Fi™ function.
The following functions can be used by connecting the camera
to a communication device via Wi-Fi™ and using the dedicated
application “Image Sync”.
Image Sync supports iOS and Android™, and can be
downloaded from the App Store or Google Play™. For the
supported operating system and other details, refer to the
download site.
t Memo
• The Image Sync screenshots used in this manual are the
ones under development and may differ from the actual
display. The screen layout and elements may be also
changed due to causes such as the version upgrade of the
application or operating system.
• For details on how to operate the communication device,
refer to the operating manual of the device.
Setting from the Menus D 3
Using the X Button
Wi-Fi Wi-Fi
Action Mode Action Mode
Communication Info
Communication Info
Reset Settings
Reset Settings
Cancel Cancel OK OK
Operating the Camera with a
Communication Device
Remote Capture
Displays the Live View image of the
camera on the communication device, and
enables controlling exposure settings and
shooting by operating the communication
device.
Image View
Displays the images saved on the memory
card inserted in the camera on the
communication device, and imports the
images to the communication device.