Customizing the settings, Nbasic settings – Sharp PN-60TW3 User Manual
Page 48
![background image](/files/867173/content/doc048.png)
48
E
Customizing the Settings
You can customize various settings of this software.
The settings are the same in both whiteboard mode and overlay mode. However, the contents of the screen will vary depending
on which mode is started.
TIPS
• If “Share software settings with all users” is selected during installation, the settings will be the same for all users.
1. Touch the “Settings” button (
) on the toolbar.
2. Set the options as necessary. (See below.)
3. When you finish adjusting the settings, touch “OK”.
n
Basic Settings
TIPS
• When this software is restarted or new boards are created / added, setting will be reflected.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) Menu
Select “Square Menu”, “Classic Menu” or “Floating Menu” for the menu format. (Page 8, 9, 10)
(2) Icon Size
Set the icon size to “Large” or “Small” in the square menu and classic menu.
(3) Touch Pen
Select the pen to use from “2 Button Pen Only” (full version only), “3 Button Pen Only”, or “Finger or Other Pen”.
Select “Finger or Other Pen” when using a passive pen, digitizer pen or finger.
“2 Button Pen Only” and “3 Button Pen Only” cannot be selected if a model that can use these functions is not connected
when the Pen Software is launched.
To use multiple models, set to “Finger or Other Pen”. In this case, the “2 button pen” and “3 button pen” functions cannot be
used.
Available items vary according to the models.