Philips SCD860/05 User Manual

Page 26

Advertising
background image

Question

Answer

Perhaps you did not remove the protective foil from the baby monitor lens.

Remove the foil.
Perhaps part of your hand covers the WiFi QR code. Hold your device in

such a way that your hand does not cover the WiFi QR code.
If the WiFi status light is solid orange, the baby monitor did not read the

QR code successfully. Go back using the arrow in the top left-hand corner of

the screen and follow the QR code instructions.
If the WiFi status light flashes orange, the camera is still booting. Wait until the

light is solid orange. Then go back using the arrow in the top left-hand corner

of the screen and follow the QR code instructions.

I cannot see my baby.

What is wrong?

Check if the WiFi signal is strong enough in the room where the baby

monitor is placed.
Check if the baby monitor is connected to a live power socket and switched

on.
The WiFi status light on the front of the baby monitor must be solid green

(see chapter ‘WiFi status light signals’).
If you use more than one baby monitor, check that the correct one is

selected. Go to the left tray and tap the baby monitor to see if it is active.
Perhaps there are already three people watching the baby. The app only

allows three people to watch simultaneously. If you have administrator rights,

you can remove access for one of the guests to be able to watch yourself.

Why does the app not

notify me that the baby

is crying?

Check if the baby monitor is connected to the WiFi network. The WiFi status

light on the front of the baby monitor must be solid green.

The baby monitor may be offline. To receive a notification that the baby

monitor goes offline, go to the left tray and switch on this notification under

‘Settings’.
The sound threshold for notification may have been set too high. In that

case, the app will only notify you when the baby produces a lot of sound.

Open the dashboard to lower the sound threshold to ensure that you will be

notified sooner when the baby starts crying.
You may have set the duration of the crying too long. Choose a shorter time

so that the app notifies you sooner.
The volume of your phone may be off. Set the volume of your phone to

normal.
Perhaps talk-back is active. Tap the talk-back icon to switch off talk-back.

During talk-back you don’t hear any sounds from the baby.
Check if you have not received an email to notify that your account has been

removed. If you have viewing rights as a guest, the administrator may also

deny you access temporarily. Contact the administrator and ask him or her

do enable you or to reinvite you as a guest.

ENGLISH

26

Advertising