Samsung S-Box Signage UHD Player Pro - Manual (Page 74)

74
Time
m MENU → System → Time → E
Time
Clock Set
NTP Settings
DST
Power On Delay
Off
0
" The displayed image may differ depending on the model.
You can configure Clock Set or DST . Configure various time-related settings.
Clock Set
Select Clock Set . Select Date or Time , and then press E .
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow
buttons to move from one entry field to the next. Press E when done.
" You can set the Date and Time directly by pressing the number buttons on the remote control.
NTP Settings
Set up the server URL and time zone to use the network time.
DST
Switches the DST (Daylight Saving Time) function on or off.
Off / On
• Start Date : Set the start date of Daylight Saving Time.
• End Date : Set the end date of Daylight Saving Time.
• Time Offset : Select the correct time offset for your timezone.
" Start Date , End Date and Time Offset are enabled only when DST is set to On .
Power On Delay
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within
the range 0–50 seconds).