Epson EpiqVision Mini EF11 1000-Lumen Full HD Laser 3LCD Projector - Manual (Page 127)

127
41 to 95 °F (5 to 35 °C) at an altitude of 7500 feet (2286 m) or less, or 41 to 86 °F (5 to 30 °C) at a
higher altitude
Doing so may cause an unstable display and could lead to projector damage. Do not use or store the
projector where it may be exposed to sudden changes in temperature.
• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or
in direct sunlight for long periods of time. Doing so may cause damage to the case.
• Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not
bring your hands or face close to the vents while projection is in progress. Do not bring your face close
to the projector while it is in use.
• Before you move the projector, make sure its power is turned off, the plug is disconnected from the
outlet, and all cables are disconnected.
• Do not place the source of an open flame, such as a lit candle, on or near the projector.
• During projection, do not block the light from the projector with a book or other objects. If the light from
the projector is blocked, the area on which the light shines becomes hot which could cause it to melt,
burn, or start a fire. Also, the lens may get hot due to the reflected light which could cause the
projector to malfunction. To stop projection, use the A/V Mute function, or turn off the projector.
• Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or
pull it excessively. Keep the power cord away from hot electrical appliances.
• Always lower the volume before turning off the projector. Turning on the projector with the volume too
high can damage your ears.
• Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in
fire, injury, or corrosion. When replacing batteries, take the following precautions: insert batteries so
that the polarities are correct; do not use batteries of different types or mix old and new batteries; do
not use any batteries other than those specified; if batteries leak, wipe away battery fluid with a soft
cloth; if battery fluid gets on your hands, wash them immediately; replace the batteries as soon as they
run out; remove the batteries if you will not be using the projector for a long period of time; do not
expose batteries to heat or flame and do not put them in water; dispose of used batteries according to
local regulations; keep batteries out of the reach of children. Batteries are choking hazards and are
very dangerous if swallowed.
• Under the following conditions, unplug the projector from the outlet and refer all repairs to qualified
service personnel. Continuing to use the projector under these conditions may result in fire or electric
shock.
• If smoke is coming from the AC adapter
• If strange odors or noises come from the AC adapter
• If the AC adapter has been damaged