Changing the projection mode using the menus, Adjusting the image height – Epson EpiqVision Mini EF11 1000-Lumen Full HD Laser 3LCD Projector User Manual
Page 40
40
Changing the Projection Mode Using the Menus
You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the
projector menus.
Note:
You can also press and hold the
A/V mute button on the projector remote control for about 6
seconds to flip the image upside-down.
1.
Turn on the projector and display an image.
2.
Press the
Settings button on the projector remote control.
3.
Press the arrow buttons to select the
Settings
menu and press
Enter
.
4.
Select the
Installation
setting and press
Enter
.
5.
Select the
Projection
setting and press
Enter
.
6.
Select the projection mode you want to use and press
Enter
.
7.
Press the
Settings button to exit the menu or the
Esc button to return to the previous screen.
Parent topic:
Adjusting the Image Height
If you are projecting from a table or other flat surface and the image is too high or low, you can adjust the
image height using the projector's adjustable foot.