Epson Home Cinema 3800 HDR Pixel-Shift 4K UHD 3LCD Home Theater Projector - Manual (Page 125)

125
Status light Power light Lamp light Temp light Status and solution
Flashing blue Off Off Flashing
orange A fan or sensor has a problem; turn the
projector off, unplug it, and contact
Epson for help
Flashing blue Off Flashing
orange Flashing
orange Auto Iris error; turn the projector off,
unplug it, and contact Epson for help
Flashing blue Off Orange Orange Power error; turn the projector off,
unplug it, and contact Epson for help
Flashing blue Off Flashing
orange Off Internal projector error; turn the
projector off, unplug it, and contact
Epson for help
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Projector Setup Settings - Extended Menu
Projector Information Display - Info Menu
Related tasks
Replacing the Lamp
Replacing the Air Filter
Cleaning the Air Filter
Turning On the Projector
Turning Off the Projector
Solving Image or Sound Problems
Check the solutions in these sections if you have any problems with projected images or sound.
Solutions When No Image Appears
Solutions When "No Signal" Message Appears
Solutions When "Not Supported" Message Appears
Solutions When Only a Partial Image Appears
Solutions When the Image is Not Rectangular