Epson Home Cinema 3800 HDR Pixel-Shift 4K UHD 3LCD Home Theater Projector User Manual
Page 98
98
Setting
Description
Sleep Mode
Automatically places the projector in standby mode after an
interval of inactivity
Sleep Mode Timer
Sets the time before the projector automatically turns off (Sleep
Mode must be turned on) from 1 to 30 minutes (30 minutes is
the defualt)
Illumination
Turns off the status light on the projector
Trigger Out
(Home Cinema 3800)
Outputs a 12V DC signal (at a maximum of 200 mA) from the
3.5 mm mini-jack
Trigger Out
port whenever the projector is
turned on
High Altitude Mode
Regulates the projector’s operating temperature at altitudes
above 4921 feet (1500 m)
Log Save Destination
Sets where you want to save logs
Note:
If you select
Anamorphic Wide
as the Trigger Out setting, voltage is only output from the
Trigger
out
port when the
Aspect
setting is set to
Anamorphic Wide
or
Horiz. Squeeze
(Home Cinema 3800).
Note:
The
Reset
setting does not reset the
Memory
,
Projection
,
High Altitude Mode
,
Standby Mode
or
Language
settings.
Parent topic:
Related references
Projector Setup and Installation Options
Related tasks
Using the Home Screen
Selecting the Language for the Projector Menus
Adjusting the Color Convergence (Panel Alignment)