Denon DNP-2000NE High-Resolution DAC Audio Streamer with HEOS (Silver) - Manual (Page 103)

Tips
I want to listen to high sound performance playback
0
The network and USB memory playback (USB-A) functions can be stopped to prevent noise that affects the sound quality. Set “Network & USB-A” to
“Disabled” in the menu. ( v p. 92)
0
The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Set “Disabled” to the “Wi-Fi”. ( v p. 92)
0
Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback. Set “Disabled” to the
“Bluetooth”. ( v p. 92)
I want to play TV audio at higher quality
0
Connect the HDMI terminal of your TV that supports the ARC function to the HDMI ARC terminal of this device and switch the input source to HDMI
ARC. ( v p. 19)
0
If you are using a TV that does not support the ARC function or a TV that does not have an HDMI terminal, the TV audio can be played by this device
using an Optical or Coaxial connection. ( v p. 21)
0
Only 2-channel linear PCM can be input as the digital audio signal to this unit.
I want to turn the display off
0
Press the DIMMER button to turn the display off. ( v p. 73)
Simple operations in the power off state
0
Press the 1 / 3 button to automatically turn the unit’s power supply on and start playback of the last selected input source.
0
When the “Network Control” function is set to “On”, you can perform playback, or other operations through AirPlay or HEOS app. ( v p. 93)
Contents Connections Playback Settings Tips Appendix
103
Front panel Rear panel
Remote control
unit
Index