Resetting network settings – Denon DNP-2000NE High-Resolution DAC Audio Streamer with HEOS (Silver) User Manual
Page 121
Resetting network settings
If network contents cannot be played or the unit cannot connect to the network, restarting the unit may improve the problem. We recommend restarting the
unit before returning the settings to the default settings. (
If the operations are not improved by restarting the unit, follow the steps below.
Network settings are reset to the factory default values. Make settings again.
However, the menu “Audio” settings are not reset.
SOURCE
X
1 3
ENTER
1
Press
X
to turn on power to the unit.
2
Press SOURCE to select “Internet Radio”, “Music
Servers” or “USB Music”.
3
When the power to this unit is on, press and hold
X
for
3 seconds or more while pressing
1
/
3
ENTER on the
main unit.
4
Remove your fingers from the two buttons when
“Please wait” appears on the display.
5
“Completed” is shown in the display when reset is
complete.
NOTE
0
Do not turn the power off until reset is complete.
121