Denon DNP-2000NE High-Resolution DAC Audio Streamer with HEOS (Silver) - Manual (Page 46)

Playing digital input
HDMI ARC
COAXIAL
USB-DAC
OPTICAL
Connecting and playing back from a TV
or digital device (HDMI ARC/Coaxial/
Optical 1/Optical 2)
1
Prepare for playback.
Check the connection, then turn on this units. (“Connecting a
TV” ( v p. 19), “Connecting to a device with digital audio output
connectors” ( v p. 24))
2
Press HDMI ARC, COAXIAL or OPTICAL to switch the
input source to “HDMI ARC”, “Coaxial”, “Optical 1” or
“Optical 2”.
3
Play the component connected to this unit.
0
If the sampling frequency cannot be detected, “Signal Unlock” will
be displayed.
0
“Unsupported” is displayed when audio signals that are not
supported by this unit are input.
Contents Connections Playback Settings Tips Appendix
46
Front panel Rear panel
Remote control
unit
Index