Denon DNP-2000NE High-Resolution DAC Audio Streamer with HEOS (Silver) - Manual (Page 20)

0
When connecting a TV to this unit, turn off the audio output of the TV’s internal speakers. See the owner’s manual of your TV for details.
0
When connecting the HDMI ARC terminal of this device to your TV, connect it to the HDMI input terminal of your TV that supports the ARC function.
0
When connecting to a TV that does not support the ARC function, use an Optical connection or a Coaxial connection to play the TV audio. ( v p. 21)
0 While using HDMI ARC for TV connection it is highly recommended for the best volume control experience to use the variable output from this unit to connect to the amplifier.
( v p. 18)
NOTE
0
Only the PCM 2-channel setting can be used to play sound from a TV via the HDMI ARC function. Set “PCM 2ch” as the audio format in the TV settings.
0
Linear PCM signals with a sampling frequency of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 192 kHz can be input into this unit.
0
Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers.
o
Specifications of supported audio formats
See “D/A converter” ( v p. 124).
Contents Connections Playback Settings Tips Appendix
20
Front panel Rear panel
Remote control
unit
Index