Denon DNP-2000NE High-Resolution DAC Audio Streamer with HEOS (Silver) - Manual (Page 29)

Connecting to the IR control connector
The following functions can be used when this unit is connected to a Denon amplifier.
0
Controlling the amplifier through this unit using the HEOS app.
0
Controlling the amplifier through this unit, using the TV remote control
(HDMI control function).
0
When this unit is turned on using the HEOS app or TV remote control
(HDMI control function), the amplifier turns on and the input source of
the amplifier switches to “EXT.PRE” or “NETWORK.”
0
When “Line Out Level” is set to “Variable” in the setting menu, the amplifier
input source will switch to “EXT.PRE”. When “Fixed” is set, the amplifier input
source will switch to “NETWORK” (NETWORK/AUX). ( v p. 82)
0
When “Power On Link” is set to “Off” in the setting menu, the amplifier power
will not turn on automatically even when this unit is turned on. ( v p. 87)
o Connection
Use the supplied IR control cable to connect the IR CONTROL OUT
connector of this unit to IR CONTROL IN connector of the amplifier.
0 Only the Denon amplifier which are equipped rear panel with IR CONTROL or
REMOTE CONTROL connector can be connected.
0
It may not be possible to control the volume with the TV remote control (HDMI
control function) depending on the Denon amplifier and TV connected to this unit.
This unit
Amplifier
IR control cable
(supplied)
Contents Connections Playback Settings Tips Appendix
29
Front panel Rear panel
Remote control
unit
Index