Denon DNP-2000NE High-Resolution DAC Audio Streamer with HEOS (Silver) - Manual (Page 53)

6
Press POWER X .
0
When the unit power is turned on, the PC automatically finds and
connects to the unit.
7
Press USB-DAC to switch the input source to “USB-
DAC”.
8
Checking the installed driver.
A
Open the “Control Panel” on the PC.
0
The control panel setting list is displayed.
B
Click “Sound”.
0
The sound menu window is displayed.
C
Check that there is a checkmark next to “Default Device” under in
“DNP-2000NE” of the “Playback” tab.
0
When there is a checkmark for a different device, click
“DNP-2000NE” and “Set Default”.
9
Checking audio output.
Outputs a TEST signal from the PC and checks the audio output
from the USB-DAC function.
A
Select “DNP-2000NE” and click “Properties”.
0
The Properties window is displayed.
q
DNP-2000NE
Contents Connections Playback Settings Tips Appendix
53
Front panel Rear panel
Remote control
unit
Index