Denon DNP-2000NE High-Resolution DAC Audio Streamer with HEOS (Silver) - Manual (Page 55)

o Audio Device Settings (macOS only)
A
With the unit power off, connect the unit and Mac using a USB cable
(sold separately).
0
For the connection procedure, refer to the “Connecting a PC or Mac”
section. ( v p. 25)
B
Press POWER X .
C
Press USB-DAC to switch the input source to “USB-DAC”.
D
Move the cursor to “Go” on the computer screen, and then click
“Utilities”.
0
The utility list is displayed.
E
Double-click “Audio MIDI Setup”.
0
The “Audio Devices” window is displayed.
F
Secondary click on “DNP-2000NE”, and then check that “Use This
Device For Sound Output” is checked.
0
If a different device is checked, select and secondary click on
“DNP-2000NE”, and then select “Use This Device For Sound
Output”.
DNP-2000NE DNP-2000NE
Contents Connections Playback Settings Tips Appendix
55
Front panel Rear panel
Remote control
unit
Index