Pioneer Dj OPUS-QUAD 4-Channel All-in-One DJ System (Black) - Manual (Page 120)

120
Using DJ software
If you connect a PC/Mac with MIDI software installed, to the unit via a USB cable, you can
control the DJ software via the unit.
• To play tracks stored on a PC with the unit, install the dedicated audio driver software. If
you use a Mac, you don’t have to install the dedicated audio driver software (page 14).
• For details on the unit’s MIDI messages, visit the URL below.
pioneerdj.com/support/
• Install DJ software and configure the audio and MIDI settings on a PC/Mac beforehand.
• You don’t need to make MIDI settings when you use rekordbox or Serato DJ Pro with the
unit.
• It’s recommended to connect this unit and a PC/Mac directly with a USB cable. When using
a USB hub, use a product recommended by the manufacturer of your PC/Mac. We don’t
guarantee the operation of all USB hubs.
Controlling DJ software
1 Connect a PC/Mac to the unit.
Read more: Rear panel (page 29)
2 Press the [SOURCE] button.
The [ SOURCE ] screen appears.
3 Select [SOFTWARE CONTROL].
The [ SOFTWARE CONTROL ] screen appears.
4 Press the [LOAD 1/3] or [LOAD 2/4] button.
The deck on which you press the button switches to control mode.
5 Launch the DJ software.
The unit starts communication with the DJ software.