Pioneer Dj OPUS-QUAD 4-Channel All-in-One DJ System (Black) - Manual (Page 76)

76
Looping
2 Press the [BEAT LOOP] knob.
Loop playback starts according to the BPM of the track and the specified number of
beats.
• If the BPM can’t be detected, it’s set to 120.
Fine-adjusting loop points
1 Press the [LOOP IN] or [LOOP OUT] button during loop
playback.
The unit switches to loop adjusting mode.
— [LOOP IN]: Adjusts the loop-in point.
— [LOOP OUT]: Adjusts the loop-out point.
2 Turn the jog wheel to fine-adjust the loop point.
• Press the [ LOOP IN ] or [ LOOP OUT ] button again, or leave the unit without operating the
controls for more than 10 seconds to cancel loop adjusting mode.
Adjusting the length of a loop
Halving the length of a loop
1 Turn the [BEAT LOOP] knob counterclockwise during loop
playback.
The loop length is halved.