Pioneer Dj OPUS-QUAD 4-Channel All-in-One DJ System (Black) - Manual (Page 88)

88
Beatgrid
You can adjust the beatgrid.
• You can’t adjust the beatgrid for tracks that haven’t been analyzed by rekordbox.
Adjusting the beatgrid
1 Press and hold the smart rotary selector on the waveform
screen.
Grid Adjust mode turns on.
2 Turn the smart rotary selector to adjust the beatgrid.
• You can adjust the beatgrid on the active deck.
• You can also adjust the beatgrid using the following buttons on the mixer information
display.
– [SNAP GRID(CUE)]: Moves the first beat position to a cue point.
– [SHIFT GRID]: Applies the settings (Pitch Bend, etc.) adjusted during
synchronization.
– [<1/2], [1/2>]: Moves the beatgrid by 1/2 beat.
• Touch [ RESET ] to reset to the original beatgrid.
• To return to Zoom mode, press and hold the smart rotary selector on the waveform screen
again.
• Press the deck button to switch between decks.