Pioneer Dj OPUS-QUAD 4-Channel All-in-One DJ System (Black) - Manual (Page 124)

124
Settings
The settings can be set on the [ SHORTCUT ] screen.
Mixer category
*: Factory setting
Vinyl Speed Adjust
Sets the adjustment method for the playback and stop
speeds in Vinyl mode (page 70).
• Setting values: Touch&Release , Touch *, Release
Play Mode
Sets playback mode.
• Setting values: Continue , Single *
• [ Continue ]: Automatically loads the next track when
playback reaches the end of a track.
• [ Single ]: Stops playback when playback reaches the end
of a track. The next track isn’t automatically loaded.
Jog Ring Brightness
Sets the brightness of the jog ring illumination.
• Setting values: Off , 1 , 2 *
Jog Ring Indicator
Determines whether or not to blink the jog ring illumination
when
playback reaches the end of a track .
• Setting values: Off , On *
Setting item Description
Channel Input Select
Memory
Determines whether or not to save the input selector setting
for [
CH 3 ] or [ CH 4 ].
• Setting values: Off *, On
• The setting isn’t saved when [ Bluetooth ] is selected with
the input selector. Instead, deck 3 or deck 4 is selected
when the unit is turned on.
• If the setting is saved when [ PHONO ] is selected, sound
may be output at a high volume depending on the signal
input to the unit when it is turned on. Make sure the input
signal matches the settings to avoid this.
Setting item Description