Pioneer Dj OPUS-QUAD 4-Channel All-in-One DJ System (Black) - Manual (Page 36)

36
Part names
10. Time display (minutes, seconds, msec)
Displays remaining time or elapsed time.
• You can set the time display (remaining time or elapsed time) in [ Time Mode ] on the
[ SHORTCUT ] screen (page 134).
11. Overall waveform
Displays the overall waveform, cue points, loop points, and Hot Cue points, etc. that have
been analyzed by rekordbox.
You can start playback from a point you touch on the waveform (page 65).
• The indicators on the overall waveform indicate the following.
– Playing address: Shows the track as a bar graph (horizontal line). The current
playback point is indicated with a white vertical line on the bar graph.
When the time display is set to [
TIME ], the graph lights up from the start of the
track up to the playback point to indicate elapsed time.
When the time display is set to [
REMAIN ], the graph goes dark to the left of the
playback point, so the remaining part of the track stays lit up.
– Scale display (30-second interval)/phrase meter: Displays scales at 30-second
intervals or displays the phrase meter below the playing address. You can set the
display (scale or phrase meter) in [
Waveform Divisions ] of the Utility settings
(page 127).
– Saved cue/loop points, Hot Cue/Loop points: Indicates cue/loop points and Hot
Cue/Loop points saved in the track with marks above the waveform.
– Cue/loop points: Indicates cue/loop points set in the track with marks below the
waveform.
– Countdown display: Displays the saved cue point that’s set as the countdown
target.
• You can change the waveform color in [ MY SETTINGS LOAD ] on the [ SOURCE ]
screen or [ Waveform Color ] on the [ SHORTCUT ] screen (page 134).
• You can set different colors for saved cue/loop points and Hot Cue/Loop points in
rekordbox.