Pioneer Dj OPUS-QUAD 4-Channel All-in-One DJ System (Black) - Manual (Page 126)

126
Settings
The settings can be set on the [ SHORTCUT ] screen.
Audio Output category
*: Factory setting
Talkover Mode
Sets TALKOVER mode.
• Setting values: Advanced *, Normal
• The [ Advanced ] setting outputs sound by attenuating only
the mid-frequency range of the sound from channels other
than the [
MIC ] channels according to the setting of the
[ LEVEL ] knob.
• The [ Normal ] setting outputs sound by attenuating the
sound from channels other than the [ MIC ] channels
according to the [ LEVEL ] knob setting.
Talkover Level
Sets the sound attenuation level for Talkover.
• Setting values: -24dB , -18dB* , -12dB , -6dB
Setting item Description
Master Attenuator
Sets the attenuation level of the sound output from the
[
MASTER 1 ] and [ MASTER 2 ] terminals.
• Setting values: -12dB , -6dB , 0dB *
Master Peak Limiter
Sets whether or not to reduce sudden and unpleasant digital
clips that occur on the master output.
• Setting values: Off , On *
Booth Monitor Attenuator
Sets the attenuation level of the sound output from the
[
BOOTH ] terminals.
• Setting values: -12dB , -6dB , 0dB *
Zone Attenuator
Sets the attenuation level of the sound output from the
[
ZONE ] terminals.
• Setting values: -12dB , -6dB , 0dB *
Setting item Description