Part names – Pioneer Dj OPUS-QUAD 4-Channel All-in-One DJ System (Black) User Manual
Page 30
30
Part names
6.
MASTER 1 terminals (balanced XLR)
Connect to analog input terminals on a power amplifier and powered speakers, etc.
•
Use the terminals for balanced output only. Connecting the terminals to unbalanced
inputs (RCA, etc.) with an XLR-RCA conversion cable (conversion adapter), etc.
results in unwanted noises and/or poor sound quality.
•
Do not connect a power cord from another product to the terminals.
•
Do not connect to a terminal that can supply phantom power.
•
Use the [
MASTER 2
] terminals for unbalanced input (RCA, etc.).
7.
ZONE terminals (balanced XLR)
Use these output terminals for the ZONE channel.
•
Use the terminals for balanced output only. Connecting the terminals to unbalanced
inputs results in unwanted noises and/or poor sound quality.
8.
BOOTH terminals (1/4”/6.35 mm, TRS)
Connect a booth monitor.
•
Use the terminals for balanced output only. Connecting the terminals to unbalanced
inputs results in unwanted noises and/or poor sound quality.
9.
Signal GND terminal
Connect a turntable’s ground wire.
Reduces unwanted noises that occur when a turntable is connected to the unit.
10.
LINE/PHONO terminals (RCA)
Connect multi players, line-level output devices, or phono-level (MM cartridge) output
devices.
•
A loud volume may be output depending on the input signal. Make sure that the input
signal matches the settings.
11.
MIC 1 terminal (XLR or 1/4”/6.35 mm, TRS)
12.
1
button
Turns the unit on or puts it in standby mode.
13.
AC IN
Connect to a power outlet with the supplied power cord.