HP Color LaserJet Pro M454dw - Manual (Page 86)

Configure IP network settings
Review the following information about configuring IP network settings.
● Introduction
● Printer sharing disclaimer
● View or change network settings
● Rename the printer on a network
● Manually configure IPv4 TCP/IP parameters from the control panel
● Link speed and duplex settings
Introduction
Use the information in the following sections to configure the printer network settings.
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and
not of the HP printer drivers.
Go to Microsoft at www.microsoft.com .
View or change network settings
Use the HP Embedded Web Server to view or change IP configuration settings.
1. Locate the printer's IP address on the printer control panel:
● Touchscreen control panel: From the Home screen on the printer control panel, touch the Wireless
icon ( ) or the Ethernet icon ( ) to view the printer's IP address or host name.
● 2-line LCD control panel: On the printer control panel, press the OK button to display the Home
screen. Use the arrow buttons and the OK button to navigate to and open the following menus:
1. Setup
2. Network Setup
3. General Settings
On the General Settings menu, select Show the IP Address , and then select Yes to display the printer's
IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the
printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If a message displays in the web browser indicating that the website might not be safe, select the
option to continue to the website. Accessing this website will not harm the computer.
3. On the EWS Home page, click the Network tab to view network information. Change settings as needed.
76 Chapter 5 Manage the printer ENWW