Images turn out elongated – Ricoh fi-8040 Desktop Scanner User Manual
Page 240
Images Turn Out Elongated
Check the following points
●
Are the rollers clean? (page 240)
●
Do the documents meet the paper requirements? (page 240)
●
Is the Roller Set S worn out? (page 240)
●
Have you adjusted the magnification level? (page 240)
If the problem still persists, check each item in
Before You Contact the Scanner Service
first, then contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.
●
Are the rollers clean?
Solution
Clean the rollers.
For details, refer to
.
●
Do the documents meet the paper requirements?
Solution
Use documents that meet the requirements.
For details, refer to
Documents for Scanning (page 91)
.
●
Is the Roller Set S worn out?
Solution
Check the counters for the consumables using one of the following methods.
●
The [Consumable counters] screen on the touch screen
The screen can be displayed in the following procedure:
→
[Cleaning & Maintenance]
→
[Consumable counters]
●
Software Operation Panel
For details, refer to
Clearing the Sheet Counters (page 325)
.
If necessary, replace the Roller Set S.
For details, refer to
Replacing the Roller Set S (page 168)
.
●
Have you adjusted the magnification level?
Solution
Use one of the following methods to adjust the magnification level for feed direction.
●
The [Magnification] screen on the touch screen
Troubleshooting
240