Ricoh fi-8040 Desktop Scanner User Manual
Page 270
Setting Item
Description
Specify whether or not to issue a scanner code.
If the [PaperStream NX Manager] setting is
enabled, a scanner code can be used when
scanning with a user application on a computer
or mobile device.
Configure the settings for wired LAN.
How to connect from a
browser (page 279)
When the scanner is connected to a network,
the URL for fi Series Network Settings (browser)
is displayed.
Configure the DirectScan settings.
Configure the settings for a server, which is to
be connected to the scanner.
Specify whether to encrypt network
communications.
Check connection
(Ping) (page 287)
Check the communication status between the
scanner and the connected computer.
Paper Source/Feeding
(page 288)
Specify the number of feeding retries when a
document is not fed from the ADF paper chute
(feeder).
Configure the settings to detect overlapped
documents during a scan.
Multifeed Detection
Area (page 290)
Specify an area to detect overlapped
documents.
Intelligent Multifeed
Detection (page 291)
Configure the setting to automatically ignore
certain patterns of overlapped documents when
the setting to detect overlapped documents is
enabled.
Configure the settings when manually loading
and scanning one sheet at a time.
Enable this mode to use the scanner at an
altitude of 2,000 m or higher.
Automatic Page Size
Detection (page 295)
When the scanner is set to detect the paper size
automatically, specify whether or not to
optimize (round up/down) the fractional part of
the scanned image.
Page Edge Filler Area
(page 295)
Configure the settings to fill in the shadow or
streaks around the edge of the scanned image.
Scanner Settings (Touch Screen)
270