Network, Initialize directscan settings] in, For details, refer to "dynamic dns" in – Ricoh fi-8040 Desktop Scanner User Manual
Page 277
Network
●
●
How to connect from a browser (page 279)
●
●
●
●
Check connection (Ping) (page 287)
Wired LAN
Configure the settings for wired LAN.
Enable Wired LAN
Enable
Specify whether or not to use the scanner connected to a wired LAN.
The factory default setting is set to on.
When [Enable] is set to off, the scanner cannot be connected to a network, even if the
scanner is connected to a wired LAN.
Set this option to off when you use the scanner only via the USB connection for the
following purposes:
●
To reduce power consumption
●
To enhance security
●
To use [Enable USB Power]
For details, refer to
.
If this setting is changed, the scanner is restarted.
IP address (IPv4)
Obtain IP Address
Set an IPv4 address of the scanner.
●
Obtain automatically (DHCP)
This is the factory default setting.
●
Configure manually
When [Configure manually] is selected, specify the following items:
-
IP Address
-
Subnet Mask
-
Default Gateway
Scanner Settings (Touch Screen)
277