Ricoh fi-8040 Desktop Scanner - Manual (Page 394)

Linking with Server
Proxy Server
Set this item to use a proxy server.
HINT
This setting can be configured in the following cases:
● When linking the scanner to the Scanner Central Admin Server directly
● When connecting to an FTP server, FTPS server, or SFTP server with DirectScan
Click [Proxy Server] under [Linking with Server] to display the window.
[Enable] check box
Set whether or not to use a proxy server.
The check box is cleared for the factory default setting.
If you select the check box, also set the following items.
● Host Name/IP address
The host name, FQDN, or IP address can be set for this item.
The space before or after the character string is ignored.
ATTENTION
Note that an IPv6 address is not supported.
HINT
When entering a host name, the DNS servers need to be set on the scanner.
● Port Number
The factory default setting is "8080".
● [Use User Authentication] check box
Set this item if a proxy server has a user authentication function.
If you select the check box, also set the following items.
- Username
Enter the user name used to connect to the proxy server.
The space before or after the character string is ignored.
- Password
Enter the password for the user name used to connect to the proxy server.
Spaces before and after the character string are maintained.
[Apply to the scanner] button
Applies the configured settings.
Network Settings (fi Series Network Settings)
394