Energizer 715 - Manual (Page 99)

Using the Bolus Wizard feature 77
5 Review the information in the ESTIMATE DETAILS screen.
Press ACT to continue to step 6. If you need to make any
changes, press ESC to return to the ENTER BG screen
(step 3) and make changes as necessary.
6 In the SET BOLUS screen, the estimated bolus amount
shows (flashing). Change the amount if desired. Press ACT
to accept and start delivery of the bolus.
NOTE -
If you have BG Reminder turned On, a screen displays allowing you to accept or modify
the length of time after this bolus before you are reminded to check your BG. See “BG
reminder” on page 32 for information about this feature.
7 The BOLUS DELIVERY screen appears. The pump will beep
or vibrate at the start and end of the bolus. As the bolus is
delivered, the screen shows the bolus type and amount
until the total units have been delivered. The screen then
defaults to the HOME screen.
4 In the ENTER FOOD screen, if this is a food bolus: if this is a correction bolus:
enter the food value you will
eat and press
ACT .
select 0 (zero) as the value and
press ACT .
(flashing)
ENTER FOOD
grams*
45
* or exch
(flashing)
ENTER FOOD
grams*
0
* or exch
(values shown are
for example only)
ESTIMATE DETAILS
Est total: 4.0U
Food intake: 45gr
(Meter) BG: 160
Food: 3.0U
Correction: 2.0U
Active Ins: 1.0U
ACT to proceed,
ESC to back up
ESC
returns to the
ENTER BG screen
ACT
to continue
SET BOLUS
Estimate
4.0 U
ACT
to accept
BOLUS DELIVERY
3:24P
NORMAL
0. 1 U